Lab Thermal Vacuum Test Chamber Outer Space Thermal Vacuum Test Chamber
Chamber Application:
This thermal vacuum test chamber is suitable for the machine equipment, spare parts, materials for high temperature, low temperature, damp and hot, depression or more single climate factor climate factor of environmental simulation test, used to evaluate the product or material parts under corresponding temperature, dampand hot, pressure environment on the reliability of the use, storage, transportation, and at the same timefor electrical performance parameters of the test specimen electricity.
Material Composition:
• Outer wall material: cold rolled steel plate + double-sided electrostatic spraying process
• Inner wall material: SUS304 high-grade stainless steel plate
• Insulation material: rigid polyurethane foam insulation layer
The Structural Strength:
• Bearing capacity of thermal vacuum test chamber bottom plate: ≤50kg (uniform load)
• Thermal vacuum test chamber sample frame bearing capacity: ≤20Kg (uniform load)
• The total weight of the thermal vacuum test chamber (bottom plate and sample rack) should not exceed 80kg
| Temperature Chambers:Thermal Vacuum Chamber | ETQ7200 |
| Climate Chambers:Thermal Vacuum Chamber | ECQ7200 |
| Test Space Volume (L) | 2000 |
| Temp. Test Parameters: |
| Temp. Range (℃) | -70~+150 |
| Temp. Constancy (℃) | ±0.1-±0.8 (Atmospheric Pressure No Load) |
| Temp. Homogeneity(℃) | ±0.5-±2.0 (Atmospheric Pressure No Load) |
| Temp. Accuracy (℃) | ±2.0 (Atmospheric Pressure No Load) |
| Heat Up Time (min) (+ 20℃ to ~150℃) | 60 |
| Cooling Down Time (min) (+ 20℃ to~60℃) | 80 |
| Pressure Range (Kpa) | Atmospheric Pressure ~1.0 Atmospheric Pressure ~0.5 |
| Pressure Accuracy (Kpa) | ±2 (Atmospheric Pressure ~40KPa); ±5%(40KPa~4KPa); ±0.1(4KPa~1KPa) |
| Pressure Release Time (min) | 45(Atmospheric Pressure→1KPa) |
| Rapid Release of Pressure Function (optional) | Pressure Release Range: 75.2KPa → 18.8KPa; Pressure Release Time: 15sec |
| Climate Test Parameters for ECQ series: |
| Temp. Range (℃) | +10~+95 |
| Temp.Constancy (℃) | ±0.1~±0.8 (Atmospheric Pressure No Load) |
| Temp. Homogeneity (℃) | ±0.1~±2.0 (Atmospheric Pressure No Load) |
| Humid. Range (%RH) | (10) 20-98 (Atmospheric Pressure No Load) |
| Humid. Constancy (%RH) | ±1-±3 (Atmospheric Pressure No Load) |
| Test Space Dimension (mm) W*D*H | 1400*1200*1200 |
| External Dimension (mm)W*D*H | 1810*3710D*2310 |
| Power | AC380V±10%, 50HZ, 3/N/PE |
| Cooling Methods | Water-Cooled |
| Options Accessories Standard Version • Iindependent sensors for specimen protection (NE60519-2.1993) •1 Set testing electrode • Nitrogen gas auxiliary device • Electronic temperature and humidity sensors • Spare parts package • E-management and cyber-software • Video monitor system • APP for mobility management • Rapid release of pressure device • Rapid recovered pressure device |
Product Tags:
|
|
Factory Compliance with ASTM D6653 Walk-In Altitude Simulation Chamber for Large Product Simulation Images
|
